Quality & compliance

The paperwork is part of the product.

A container held at Rotterdam or Osaka costs more per day than the inspection that would have prevented it. We build the technical file alongside production, and we keep the test evidence that customs and notified bodies ask for.

Markets

Four regimes, four different files.

Eyewear regulation is not harmonised. The same frame needs different evidence depending on where it lands — and the requirements below are what we prepare by default.

MarketRegulationWhat we prepareTest evidence
European Union CE — EU 2016/425 (PPE, sunglasses)
EN ISO 12870 (frames)
Technical file, declaration of conformity, labelling artwork Dimensional, mechanical strength, EN 1811 nickel release
United States FDA 21 CFR 801.410 Impact-resistance records, compliant labelling, importer documentation Drop-ball test, 100% of production lots sampled
Japan JIS S 7302 / JIS T 7333 Per-shipment inspection sheet, dimensional record Tolerance check against JIS limits, hinge durability
Korea KC certification Test coordination, registration support, Korean labelling Third-party laboratory testing, coordinated by us

Classification of optical frames as medical devices varies by member state. We will confirm the route for your specific product and destination in writing before tooling begins.

In-house testing

Six checks before anything ships.

01

Dimensional inspection

Every critical dimension measured against the 2D drawing on first article, then sampled at AQL 1.0.

02

Hinge cycle test

10,000 open/close cycles on a pneumatic rig, with torque measured before and after.

03

Drop-ball impact

FDA-specified 16 g steel ball from 1.27 m, on lenses and on finished eyewear.

04

Nickel release

EN 1811 screening on metal components, with third-party confirmation for EU shipments.

05

Plating thickness

X-ray fluorescence on every plating batch; 3 µm minimum recorded per lot.

06

Colour verification

Spectrophotometer check against the approved master, ΔE ≤ 1.0 for production.

Quality system

ISO 9001 processes,
ISO 13485 discipline.

Our quality system is certified to ISO 9001. For clients whose frames are classified as medical devices in their market, we apply the documentation structure of ISO 13485 — design history file, risk analysis, traceability and CAPA — without claiming a certification we do not hold.

Every batch carries a material lot number, an operator record and an inspection report. If a claim arrives eighteen months later, we can trace the block it came from.

What ships with every order

  • 01 Commercial invoice, packing list, bill of lading set
  • 02 Declaration of conformity (EU) or impact-resistance record (US)
  • 03 Material certificate and batch traceability sheet
  • 04 First-article inspection report and in-line checkpoints
  • 05 Test evidence: drop-ball, nickel release, plating thickness
  • 06 Care and labelling artwork, camera-ready
Non-conformance

What happens when something is wrong.

Within 72 hours

A written containment report: how many units are affected, where they are, and what we propose to do with them.

Within 10 days

Root-cause analysis against the production record, and a corrective action with an owner and a date.

At your option

Replacement, credit or rework at our cost. We do not ask a client to absorb our mistake.

Documentation

Ask for a sample technical file.

We will send a redacted example for a comparable product so your compliance team can review the structure before you commit.